1、 High efficiency, fully based on Chinese people’s habits, humanized design concepts, greatly enhancing operational efficiency;
2, the analysis system can be based on PC (Windows) and PDA (Pocket) for data analysis;
3, low power consumption, the use of lithium battery power supply, continuous use of up to 60 hours or more, rapid charging can be used in 10 minutes;
4, multi-layer thermal protection, the shell is made of high heat-resistant materials, lined with thermal insulation materials and become, can cope with the most severe lead-free process and withstand harsh industrial environments;
5, small size, large storage capacity, the use of FLASH memory chip, any accident will not lose data;
Product advantages
6, easy to operate, all the data are managed using a database, you can use the wizard to quickly import process analysis;
7, software operation is equipped with Chinese simple, English, German and other language versions;
8, high temperature protection, the internal temperature of the instrument beyond the automatic shutdown test function, beyond a certain temperature automatically shut down the power supply;
9, measurement accuracy ± 1 ℃ (-40 ℃ ~ 1050 ℃), the collection of a variety of start-up;
10、 Intelligent control, any situation have indicator light prompts (low power, charging status, data download, data clearing,

Memory overflow, high temperature warning, instrument reset, etc.)

Furnace temperature tester Steps for use:

1. The thermocouple probe is tiny in shape and must be fixed in the test position with the specified high temperature solder or adhesive, otherwise it will be loosened by heat and deviate from the intended test point, which will cause test error.
2. For measurement, a fully assembled board must be used. First of all, the thermal characteristics of the printed circuit board components analysis, due to the different thermal properties of the printed circuit board, the size of the components and material differences and other reasons, the actual heat rise at various points is not the same, the most hot, the coldest point, respectively.
Hot spot, the coldest point, respectively, set up thermocouples will measure the highest temperature and the lowest temperature.
3. As much as possible to set up thermocouple test points, in order to fully reflect the real heat state of each part of the printed board. For example, the center of the printed board and the edge of the heat degree is not the same, large volume components and small components with different heat capacity and heat-sensitive components must be set up to measure the temperature of the board.
4. The battery used for lithium batteries and rechargeable nickel-cadmium batteries. Combined with the specific circumstances of reasonable testing and timely charging to ensure the accuracy of the test data.